A ‘Check SD card’ message can appear on your Bandit due to problems with the microSD card you are using. To find a compatible microSD card, check the list of microSD cards that have been tested with the Bandit and are known to work well: $am4746 Which memory card can I use with TomTom Bandit? $aclose
Recording not starting:
The probable cause is a read error with your microSD card. To fix this problem you can repair the microSD card as follows:
- From the Camera Status screen on your camera, move down to open the SETTINGS menu.
- Select GENERAL , then move right.
- Select STORAGE , then move right.
- Select REPAIR SD , then move right.
- Select YES to start repairing the microSD card.
Bandit tries to fix any read errors, then restarts your camera.
Recording starts but stops after a while:
This is caused by slow write speeds to the microSD card and is a result of using a lower class of card. Make sure you use at least a Class 10 microSD card.
It also could be a result of heavy use. If this is the case check our list of supported microSD cards: $am4746 Which memory card can I use with TomTom Bandit? $aclose
Bandit의 마이크로 SD 카드 확인
사용 중인 마이크로 SD 카드에 문제가 발생할 경우 Bandit에 'SD 카드 확인' 메시지가 나타날 수 있습니다. 사용 가능한 마이크로 SD 카드를 찾으려면 테스트를 통해 Bandit과 원활하게 연동되는 것으로 밝혀진 마이크로 SD 카드의 목록을 확인하세요(TomTom Bandit에는 어떤 메모리 카드를 사용할 수 있습니까? 참조).
녹화가 시작되지 않음:
마이크로 SD 카드에 읽기 오류가 발생했을 가능성이 높습니다. 문제를 해결하기 위해 다음과 같이 마이크로 SD 카드를 수리할 수 있습니다.
- 카메라의 카메라 상태 화면에서 아래로 이동해 설정 메뉴를 엽니다.
- 일반 을 선택한 후 오른쪽으로 이동합니다.
- 저장공간 을 선택한 후 오른쪽으로 이동합니다.
- SD 수리 를 선택한 후 오른쪽으로 이동합니다.
- 마이크로 SD 카드의 수리를 시작하려면 예를 선택합니다.
Bandit이 읽기 오류를 수정한 다음 카메라를 재시작합니다.
녹화가 시작되고 잠시 후 정지됨:
낮은 등급의 카드를 사용하여 마이크로 SD 카드에 대한 쓰기기 속도가 느린 것이 원인입니다. 클래스 10 이상의 마이크로 SD 카드를 사용하세요.
사용량이 많은 것이 원인일 수도 있습니다. 원인이 이와 같을 경우 지원되는 마이크로 SD 카드의 목록을 확인합니다. $am4746 TomTom Bandit에는 어떤 메모리 카드를 사용할 수 있을까요? $aclose