Removing and inserting the Batt-Stick on your Bandit

Removing the Batt-Stick

To remove the Batt-Stick, follow these steps:

  1. Press the release lever of the Batt-Stick.
    Image
  2. While holding the lever turn the cap anti-clockwise until you see two dots aligned.
    Image
  3. Pull the Batt-Stick out.
    Image

Inserting the Batt-Stick

To insert the Batt-Stick, follow these steps:

  1. Insert the Batt-Stick into the camera.
    Image
  2. Make sure the two dots align and are close together.
    Image
  3. Turn the cap clockwise to lock the Batt-Stick into the camera.
    Image

Important:
If you see only one dot when the Batt-Stick is inserted do not try to turn it. You must first put the Batt-Stick in the unlocked position before you can insert it correctly.
Image

To put the Batt-Stick in the unlocked position follow these steps:

  1. Hold the Batt-Stick and press the release lever while turning the cap anti-clockwise.
    Image
  2. When you see a dot and arrow to the left of the release lever the Batt-Stick can be inserted as described above.
    Image