Restoring your navigation device

If your navigation device is not functioning correctly, reinstalling the device software may solve the problem. The following procedure is only applicable to devices using TomTom HOME for updates.

This procedure formats the navigation device to delete all of the installed items. The operating system of the navigation device is then downloaded and installed again using TomTom HOME.

Important : Your navigation device does not function correctly without a map. Your choice of procedure to follow depends on whether you have an active map (subscription) on your account or not.

Watch the video

These steps will show you how to download your map again:

Important: Follow this procedure only when you have been advised to by TomTom Customer Support, or if you have an active Map Update Service subscription.
If you're not sure, follow the steps for 'I don't have a map to download' below.

I have a map to download on my account

Image Delete downloaded TomTom files from your computer
This step guides you through removing the content of your navigation device from your computer, so it can be downloaded again.

  1. Connect your navigation device to your computer and wait for your device to start. If your device asks Do you want to connect to 'Computer' tap Yes .

    If your device is not recognised by the computer or TomTom HOME, there is a solution available in our FAQs. For more info, visit Why is my device not properly recognised?

    If your device does not start, press the power button for about 20 seconds until you hear the drum sound, then release the power button.

    TomTom HOME should start automatically. If TomTom HOME does not start, you must start it manually.

  2. In TomTom HOME, click More to go to page 2.

  3. Click Manage my device .

  4. Click the tab Remove items from computer .

  5. Select the checkboxes for the following categories if they are present: Zip Codes , Applications , Maps , Voices and QuickGPS .

  6. Click Remove items from computer at the bottom of the screen. Click OK to confirm you want to delete the items.

  7. Click Done , then close TomTom HOME.

Windows :

In the Windows notification area, right click on the TomTom HOME icon and click Exit .

Mac :

Click on the TomTom HOME icon in the dock. The Finder bar shows the option for TomTom HOME . Click Quit HOME .

Image Format your device
Image
This step guides you through formatting your navigation device when it is connected to your computer.
Note : Formatting your device will remove all data, including Favourites, but this is essential to restore the functionality.
For instructions, find your operating system below:

Windows

  1. Windows 8: Press Windows logo key +E .
    Windows 7: Click Start then click Computer .
    Windows Vista: Click Start then click Computer .
    Windows XP: Click Start then click My Computer .

  2. Find your TomTom navigation device in the Devices with Removable Storage list.

    Note : Your navigation device might not have a label or name, but only a drive letter.

  3. Right click on the navigation device and select Format...

  4. In File system , make sure FAT32 is selected.

  5. Make sure Quick Format is not selected.

    Image

  6. Click Start . A warning is shown.

  7. Click OK .
    Windows formats your device.

  8. When the formatting is complete, click OK then click Close to close the format window.

macOS

  1. From the Finder menu, click Go then click Utilities . Double-click Disk Utility .

  2. Disk Utility lists the available disks and their volumes. Select the volume under your navigation device.

    Image

  3. Click Erase and then select MS-DOS (FAT) from the Volume Format drop-down menu.

  4. Click Erase . A warning is shown.

  5. Click Erase . Disk Utility formats your device.

Note : When you format a memory card using a memory card reader, you need to insert that memory card in your navigation device to initialise it. You can then reinstall the software using a memory card reader.

Image Reinstall the software on your device
Image
This step guides you through the installation of the software onto your navigation device.

  1. Start TomTom HOME.

  2. Click Update my device .

  3. Select all updates except the map.

  4. Click Update and Install

    Important : Do not install any maps until all other updates are installed.

  5. Repeat steps 3 and 4 until the map is the last update remaining.

  6. Select the map and click Update and Install to install it.

    Click Done . Your navigation device restarts.

    Note : Keep your navigation device connected. TomTom HOME checks your device to see if updates are required. If updates are required follow the instructions in TomTom HOME.

  7. If no further updates are offered, click the blue disconnect device button in the bottom right corner of TomTom HOME to safely disconnect your device.

  8. Disconnect your device from your computer and enjoy your navigation experience!

I don't have a map to download

these steps will show you how to make a backup of your installed map and then restore it.

Image Make a backup of your device
This step guides you through backing up the contents of your navigation device to your computer.

  1. Connect your navigation device to your computer and wait for your device to start. If your device asks Do you want to connect to 'Computer' tap Yes .

    If your device is not recognised by the computer or TomTom HOME, there is a solution available in our FAQs. For more info, visit Why is my device not properly recognised?

    If your device does not start, press the power button for about 20 seconds until you hear the drum sound, then release the power button.

    TomTom HOME should start automatically. If TomTom HOME does not start, you must start it manually.

  2. In TomTom HOME, click More to go to page 2.

  3. Click Manage my device .

  4. Select the Maps check box.

  5. Click Copy items to computer .

  6. When copying has finished, click Done .

  7. Click Manage my device .

  8. Click the tab Remove items from computer .

  9. Select the checkboxes for the following categories if they are present: Applications , Voices and QuickGPS .

  10. Click Remove items from computer at the bottom of the screen. Click OK to confirm that you want to delete the items.

  11. Click Done , then close TomTom HOME.

Windows :

In the Windows notification area, right click on the TomTom HOME icon and click Exit .

Mac :

Click on the TomTom HOME icon in the dock. The Finder bar shows the option for TomTom HOME . Click Quit HOME .

Image Format your device
Image
This step guides you through formatting your navigation device when it is connected to your computer.

For instructions, select your operating system from the list below:

Windows

  1. Windows 8: Press Windows logo key +E .
    Windows 7: Click Start then click Computer .
    Windows Vista: Click Start then click Computer .
    Windows XP: Click Start then click My Computer .

  2. Find your TomTom navigation device in the Devices with Removable Storage list.

    Note : Your navigation device might not have a label or name, but only a drive letter.

  3. Right click on the navigation device and select Format...

  4. In File system , make sure FAT32 is selected.

  5. Make sure Quick Format is not selected.

    Image

  6. Click Start . A warning is shown.

  7. Click OK .
    Windows formats your device.

  8. When the formatting is complete, click OK then click Close to close the format window.

macOS

  1. From the Finder menu, click Go then click Utilities . Double-click Disk Utility .

  2. Disk Utility lists the available disks and their volumes. Select the volume under your navigation device.

    Image

  3. Click Erase and then select MS-DOS (FAT) from the Volume Format drop-down menu.

  4. Click Erase . A warning is shown.

  5. Click Erase . Disk Utility formats your device.

Image Reinstall the software on your device
Image
This step guides you through the installation of the software onto your navigation device.

  1. Start TomTom HOME.

  2. Click Update my device .

  3. Select all updates.

  4. Click Update and Install .

    Note : Keep your navigation device connected. TomTom HOME checks your device to see if updates are required. If further updates are required, follow the instructions in TomTom HOME.

  5. Repeat steps 3 and 4 until no more updates are offered.

Image Restore items to device
Image
This step guides you through restoring the previously copied content from your computer to your navigation device.

  1. In TomTom HOME, click Manage my device .

  2. Click the tab Install items from computer .

  3. Click on the + sign next to Maps and then click Add .

  4. Click the blue disconnect device button in the bottom right corner of TomTom HOME to safely disconnect your device.

  5. Disconnect your device from your computer and enjoy your navigation experience!

Was this article helpful?
1212 out of 4978 found this helpful