Using latitude and longitude coordinates

Note: This feature is not supported on all devices. To find out more about the features in your navigation device, refer to the device’s reference guide.

To navigate to a location using latitude and longitude coordinates, find your device below:

GO 40, GO 50, GO 51, GO 60, GO 61, GO 400, GO 500, GO 600, GO 510, GO 610, Rider 410, Rider 400, Rider 40, GO 5000, GO 6000, GO 5100, GO 6100, Trucker 5000, Trucker 6000, START 40, START 50, START 60, Start 42, Start 52, Start 62, VIA 52, VIA 62, GO 520 Wi-Fi, GO 620 Wi-Fi, Rider 500, Rider 550, GO 5200 Wi-Fi, GO 6200 Wi-Fi, GO Basic, GO Classic, GO Essential, GO Premium, GO Comfort, GO Supreme, GO Expert, GO Camper Max, GO Navigator, GO Discover, GO Superior and GO Expert Plus

1. To the right of the search box, select the type of search. By default this is set to Current map .
2. Select Latitude Longitude .
   The keyboard changes to a special keyboard for coordinate entry.

   Tip : The example shown under the line when you open the search screen gives the coordinates for your current location.

3. As you type in the coordinates, suggestions are shown based on what you have typed. You can continue typing or select a suggestion.
   • The line under the code turns red if the coordinates are incorrect and turns blue when correct.
   • The example under the line helps you to type in the correct code.
4. Select a suggestion for your destination then select Drive .

Note : that latitude and longitude coordinates can be formatted in three different ways:

• Degrees (d.d°) - 49.5000°, -123.5000°
• Minutes (d°m.m') - 49°30.0', -123°30.0'
• Seconds (d°m's'') - 49°30'00"N, 123°30'00"W

GO 800/1000/2000 series, GO LIVE Top Gear edition, Via series, Start 20 series, Start 60, Blue&Me TomTom 2 LIVE, Sony XNV, TomTom Connect

To navigate to a location using latitude and longitude coordinates, follow the steps below:

1. From the Main menu, tap Navigate to...
2. Tap Latitude Longitude.
3. Enter the coordinates and tap OK .

Your navigation device is set to Degrees by default. For steps on how to change the format, follow the steps below:

1. From the Main menu, tap Settings .
2. Tap Set units .
3. Select a latitude and longitude format in the Coordinate display screen and tap Done .

GO x50 LIVE, GO x50, GO x40, GO x30, GO x20, GO x10, GO
XXL IQ Routes, XXL Classic, XL LIVE, XL, ONE
RIDER 2nd edition, RIDER 1st edition
Blue&Me TomTom, Carminat TomTom,
Toyota Aygo Connect Multimedia,
Mazda Navigation (NVA-SD8110)(LIVE)

To navigate to a location using latitude and longitude coordinates, follow the steps below:

1. From the Main menu, tap Navigate to...
2. Tap Latitude Longitude.
3. Enter the coordinates and tap OK .

Your navigation device is set to Degrees by default. For steps on how to change the format, follow the steps below:

1. From the Main menu, tap Change preferences .
2. Tap Set units .
3. Select a latitude and longitude format in the Coordinate display screen and tap Done .

Rider (2013), Rider Pro, Urban Rider

To navigate to a location using latitude and longitude coordinates, follow the steps below:

1. From the Main menu, tap Navigate to...
2. Tap Latitude Longitude.
3. Enter the coordinates and tap OK .

Your navigation device is set to Degrees by default. For steps on how to change the format, follow the steps below:

1. From the Main menu, tap options .
2. Tap Set units .
3. Select a latitude and longitude format in the Coordinate display screen and tap Done .